Rabbit RCM3200 Manual de usuario descargar pdf (Pagina 51)

User’s Manual 45

6.4.2 How to Set Up your Computer’s IP Address for Direct Connect

When your computer is connected directly to the RCM3200 board via an Ethernet connec-

tion, you need to assign an IP address to your computer. To assign the PC the address

10.10.6.101 with the netmask 255.255.255.0, do the following.

Click on

Start > Settings > Control Panel to bring up the Control Panel, and then dou-

ble-click the Network icon. Depending on which version of Windows you are using, look

for the TCP/IP Protocol/Network > Dial-Up Connections/Network line or tab. Double-

click on this line or select Properties or Local Area Connection > Properties to bring

up the TCP/IP properties dialog box. You can edit the IP address and the subnet mask

directly. (Disable “obtain an IP address automatically.”) You may want to write down the

existing values in case you have to restore them later. It is not necessary to edit the gate-

way address since the gateway is not used with direct connect.

6.4.3 Dynamic C Compiler Settings

If you are using an RCM3200 or RCM3220, remember to allow the compiler to run the

application in the program execution SRAM by selecting

Code and BIOS in Flash, Run

in RAM

from the Dynamic C Options > Project Options > Compiler menu.

RCM3200

User’s PC

Ethernet

crossover

cable

IP 10.10.6.101

Netmask

255.255.255.0

Direct Connection PC to RCM3200 Board

Board

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 127 128

Sin comentarios

Rabbit RCM3200 Manual de usuario Pagina 51